Airgoo compressor AG-80 with 50 liter tank - 8 bar - 360L/min - 3HP
This compressoris a high output compressor which can be used in a number of different environments, such as the home and garage applications and so on.
Its lightweight design makes it ultra mobile and ideal for many application from small/medium garages to small/medium commercial premises.
Its twin outlets are powered using the latest in direct drive technology which is designed to provide ultimate flow at a low noise level. The welded 50 litre tank is cast iron which is powder coating for additional resistance to wear and tear and complies with the latest european standards.. As the pump head is directly coupled to the heavy duty induction motor and an aluminium cylinder head.
The AG-80 compressor really has been designed for a more reliable and quieter operation.
Fitted with a fully automatic pressure cut-out switch with twin gauges displaying tank and working pressures.
♦ Power: 2.2kw (3hp)
♦ Working Pressure: 8bar (116psi)
♦ Speed: 2850rpm
♦ Displacement: 360L/min
♦ Tank Capacity: 50Ltr
♦ Voltage: 13amp 240v 50Hz (European Spec)
♦ Warranty: 12 Month Return to Base Warranty
♦ Dimensions: 795m x 375mm x 675mm
♦ Weight: 42.4KGS
This compressor is fitted with two 1/4 inch BSP outlets which are fitted with standard European Push Fit Female NW 7,2 adapters.
Important Safety Information:
Before using this compressor carefully read through the entire instruction manual to understand the limitations and potential hazards which apply to your application. Failure to do so could lead to serious personal injury.
Power tool plugs must match the outlet and the moulded plug should never be altered in any way or exposed to rain or wet conditions.
Using with the compressring of the nomal air. There can't be together with any inflammable and explosive gas when using.
The power cord should not be abused in any way, such as being used to carry, move or unplugging the unit.
Keep the cord away from anything which may potentially cause damage, such as heat, oil, sharp edges and moving parts.
The ambient temperature should be -10-40 celsius degree.